Products
Triple screw pumps
Hydro Prokav offers Wide Variety of high performance Triple-Screw Pumps which are highly efficient in handling a wide range of liquids with varying viscosity at high pressures, for use in a variety of industrial and marine applications. The pumps are manufactured using premium quality materials matched to service requirements.
Materials of construction
Pump Type |
Housing |
Screws |
Cartridge Assembly |
Gasket |
| Standard |
Cast Iron
|
Nitrided chrome - Alloy Steel
|
Cast Iron
|
FIBRE |
| Standard |
Fabricated Steel |
Nitrided chrome –Alloy Steel |
Bronze |
PTFE |
Key Features - Benefits that Reduce life cycle cost
Maximum Reliability of System to Increase Revenue - Pumps delivers smooth flows with minimum pulsations
- Hydraulically balanced screws
- Lower Maintenance Costs by up to 50 %
- Pumping elements contained in one cartridge assembly
- Fast, easy replacement of parts
- Reduced overhaul turn around time
- No timing gears required and fewer wearable parts
- One or no bearings required and fewer wearable parts
Versatility to meet Customer Specification
- Custom design fabricated pump and per API standards
- A choice of shaft seals for every application
- Mounting configurations to fit in any space limitations: Horizontal, Vertical, Close Coupled, Sump
- In - line construction enables simplified piping arrangements
- ANSI or Din Flanges
- One pump size designed to offer flexibility in flow
Technical Specification
Capacity : From 1 to 400 Cu.M / HR
Pressure : Up to 64 Bar
Viscosity : 1-1, 00,000 CST
Temperature: Up to 300 DEG C
User Industries
- Cement Industry
- Power Stations
- Petro Chemical Refineries
- Oil Depots
- Ship Building Industry
- Rayon, Staple fibres
- Steel Industries
- Fertilizer Industries
- Paper Mills
- Food Processing Industries Breweries
These Pumps are designed for handling clear viscous liquids and are suitable for different pressures upto 70 bars. The pumping elements comprise of a power screw and two idler screws, running in a close fitting insert. The idler screws serve to maintain the closed chambers that pump the liquid. Each screw is provided with a drum so that axial forces are hydraulically balanced. The shaft seal chamber is connected internally to the inlet and the seal is therefore always subjected to the inlet and the seal is therefore always subject to inlet pressure only. The inserts screws and balancing bushes together with bearing and seals for a replaceable cartridge that is located inside a casing. The pumps can be supplied in a variety of materials of construction and for various mounting arrangements.
Technical specification
Viscosity: 0.8 cst to 1, 00,000 cst,
Temperature: 30 Deg C-130 Deg C
Capacity 5 litres per minute to 10,000 Litres per Minute
Pressure: 70 Bar (Maximum)
