Progressive Cavity Pumps Manufacturers | Hydro Prokav Pumps, Coimbatore

THE FUNCTION

The working principle of Hydro Prokav dual flow Twin Screw Pumps is dependent on the rotation of the two screw spindles in the closed compartment. There is always a predefined fine clearance exists between the outside diameters of the screw spindles and the casing bore/ liner in which the screw spindles are located. Each half of the screw spindles is left handed and right handed thus when the spindles rotates, driven by the timing helical gears located at the end of the screw. The liquid is drawn towards the end of the screw and entrapped between the bore of the pumping compartment as well as the flanks of the screws and is then propelled axially from both the ends towards the centre. Such a dual flow nullifies the axial thrust completely, thereby enabling the screws to remain in a state of hydraulic balance resulting in high volumetric efficiency and overall efficiency.

t1

Salient Features

  • High volumetric efficiency
  • High suction lifts without cavitation
  • Self priming and ability to handle air vapour and gas in fluids
  • No axial thrust
  • Long and trouble free service life with safety in operation and user friendly design
  • Uniform metered flow
  • Ability to handle different types of liquids and fluids
  • Conforms and adheres to API 676, 2nd edition
  • Dry running capability
  • Negligible wear over years
  • Axial smooth steady flow
  • High speed running
  • Pulsation free output
  • Negligible vibrations
  • Intensive to varying viscosities
  • Long maintenance free service
  • Lowest NPSHR
  • Interchangeable liner
  • Adaptability of various MOC
  • Shaft sealing at suction pressures
  • Axial thrusts completely eliminated
  • No metal to metal contact between rotors
  • Positive clearance between rotors

Fluids Handled (applications)

  • Fuel Oil
  • LSHS
  • HPS
  • RFO
  • Crude Oil
  • Vacuum Residue
  • Wax
  • Bitumen
  • Mineral Oil
  • Turbine Oil
  • Hydraulic Oil
  • LDO
  • HSD
  • Kerosene Oil
  • Naphtha
  • Lubricating Oil
  • Molasses
  • Black Liquor
  • Polymeric Resins
  • Lacquers
  • Cosmetic Creams
  • Detergents
  • Soaps
  • Glucose
  • Jelly Fats
  • Palm Oil
  • Viscose
  • Asphalt

User industries

  • Petro Chemicals
  • Refineries
  • Oil Storage Depots
  • Bunkering Stations
  • Power plants
  • Marine
  • Shipping
  • Sugar Industries
  • Steel Industries
  • Paper Industries
  • Textile Industries
  • On shore and off shore Exploration

Technical Parameters

t2
  • Capacity :1 – 1200 M3/Hr
  • Head : 50 Kg/cm2
  • Temperature :Up to  300 .C
  • Viscosity : UP to 5,00,000 Centre Stoke

Confirming to API 676 Standards

Mounting:

  • Horizontal Internal Bearing pumps
  • Horizontal External Bearing pumps
  • Jacked Pumps
  • Vertical Pumps

Material of construction

  • Casing : Cast iron, Cast steel, Cast stainless steel
  • Liner : Cast iron, Cast stainless steel
  • Screws : Alloy steel, Nitride steel & Stainless steel
  • Timing Gears: EN 36 / EN 24